Video Support
Be good to your equipment and it will be good to you. See how in the videos below.
Watlow EZ-Zone® for Furnaces and Large Annealers
MANUALLY RUNNING PROFILES
Learn how to manually start, stop, pause and resume profiles in your Watlow EZ Zone® controller.
PROGRAMMING PROFILES
Programming profiles in your Watlow
EZ-Zone® controller.
CLEARING HIGH LEVEL
Manually clearing high level alarm.
Watlow EZ-Zone® for Hot/Color Boxes
SET THE ANNEALING RATE
Use this if you are annealing your work.
SET TEMPERATURE MANUALLY
If you are working with the oven as an annealer, use this manual setup to set your working temperature and then set the ANNEALING “COOL DOWN” rate at the end of the day.
Watlow EZ-Zone® PM Plus - Touchscreen
SETTING UP APP INTERFACE
Learn how to set up your Watlow EZ-Link App Interface.
PROGRAMMING PROFILE
Learn how to program your profile for a Watlow EZ-Link PM Plus touch screen.
Fine-Tuning
ADJUSTING THE CURRENT LIMIT
Learn how to check and manually adjust your current limit.
LOW LIMIT ALARM SETUP
Set up alarm for low limit alerts.
SENSOR BACK UP
Activates either thermocouple
with the limit if one goes bad.
Fireye Systems
FIRING UP THE FIREYE
Follow the procedure to start and run your Fireye Safety System.
Text Alert
SETTING UP TEXT ALERT
Follow along to make sure all of your settings are correct for the Text Alert System to function properly.